% This is "sig-alternate.tex" V1.8 June 2007
% This file should be compiled with V2.3 of "sig-alternate.cls" June 2007
%
% This example file demonstrates the use of the 'sig-alternate.cls'
% V2.3 LaTeX2e document class file. It is for those submitting
% articles to ACM Conference Proceedings WHO DO NOT WISH TO
% STRICTLY ADHERE TO THE SIGS (PUBS-BOARD-ENDORSED) STYLE.
% The 'sig-alternate.cls' file will produce a similar-looking,
% albeit, 'tighter' paper resulting in, invariably, fewer pages.
%
% ----------------------------------------------------------------------------------------------------------------
% This .tex file (and associated .cls V2.3) produces:
%       1) The Permission Statement
%       2) The Conference (location) Info information
%       3) The Copyright Line with ACM data
%       4) NO page numbers
%
% as against the acm_proc_article-sp.cls file which
% DOES NOT produce 1) thru' 3) above.
%
% Using 'sig-alternate.cls' you have control, however, from within
% the source .tex file, over both the CopyrightYear
% (defaulted to 200X) and the ACM Copyright Data
% (defaulted to X-XXXXX-XX-X/XX/XX).
% e.g.
% \CopyrightYear{2007} will cause 2007 to appear in the copyright line.
% \crdata{0-12345-67-8/90/12} will cause 0-12345-67-8/90/12 to appear in the copyright line.
%
% ---------------------------------------------------------------------------------------------------------------
% This .tex source is an example which *does* use
% the .bib file (from which the .bbl file % is produced).
% REMEMBER HOWEVER: After having produced the .bbl file,
% and prior to final submission, you *NEED* to 'insert'
% your .bbl file into your source .tex file so as to provide
% ONE 'self-contained' source file.
%
% ================= IF YOU HAVE QUESTIONS =======================
% Questions regarding the SIGS styles, SIGS policies and
% procedures, Conferences etc. should be sent to
% Adrienne Griscti (griscti@acm.org)
%
% Technical questions _only_ to
% Gerald Murray (murray@acm.org)
% ===============================================================
%
% For tracking purposes - this is V1.8 - June 2007

\documentclass{sig-alternate}
\usepackage{listings}
\usepackage{algorithm}
\usepackage{algorithmic}
\usepackage{ulem}
\usepackage{ariesbeck/tricks}
\usepackage{bryan/tricks}
\usepackage{fayola/tricks}
\usepackage{fig1/tricks}
\usepackage{joe/tricks}
\usepackage{jprice/tricks}
\usepackage{lsheep/tricks}
\usepackage{rickard/tricks}
\usepackage{menzies/tricks}
\usepackage{tomi/tricks}
\usepackage{color}
\usepackage{ifthen}

\newcommand{\sq}[2]{
  \definecolor{thiscol}{gray}{.#2}
  \ifthenelse{#2<50}
    {\color{white}}
    {\color{black}}
  \colorbox{thiscol}{\makebox[2em]{#1}}}

\begin{document}
%
% --- Author Metadata here ---
\conferenceinfo{ASE}{'09 Auckland, NZ}
%\CopyrightYear{2007} % Allows default copyright year (200X) to be over-ridden - IF NEED BE.
%\crdata{0-12345-67-8/90/01}  % Allows default copyright data (0-89791-88-6/97/05) to be over-ridden - IF NEED BE.
% --- End of Author Metadata ---

\title{Applications of Simulation and AI Search: Assessing the Relative Merits of Agile vs Traditional Software Development}
%
% You need the command \numberofauthors to handle the 'placement
% and alignment' of the authors beneath the title.
%
% For aesthetic reasons, we recommend 'three authors at a time'
% i.e. three 'name/affiliation blocks' be placed beneath the title.
%
% NOTE: You are NOT restricted in how many 'rows' of
% "name/affiliations" may appear. We just ask that you restrict
% the number of 'columns' to three.
%
% Because of the available 'opening page real-estate'
% we ask you to refrain from putting more than six authors
% (two rows with three columns) beneath the article title.
% More than six makes the first-page appear very cluttered indeed.
%
% Use the \alignauthor commands to handle the names
% and affiliations for an 'aesthetic maximum' of six authors.
% Add names, affiliations, addresses for
% the seventh etc. author(s) as the argument for the
% \additionalauthors command.
% These 'additional authors' will be output/set for you
% without further effort on your part as the last section in
% the body of your article BEFORE References or any Appendices.
  
\numberofauthors{6} %  in this sample file, there are a *total*
% of EIGHT authors. SIX appear on the 'first-page' (for formatting
% reasons) and the remaining two appear in the \additionalauthors section.
%
\author{
% You can go ahead and credit any number of authors here,
% e.g. one 'row of three' or two rows (consisting of one row of three
% and a second row of one, two or three).
%
% The command \alignauthor (no curly braces needed) should
% precede each author name, affiliation/snail-mail address and
% e-mail address. Additionally, tag each line of
% affiliation/address with \affaddr, and tag the
% e-mail address with \email.
%
% 1st. author
\alignauthor
Bryan Lemon\\
  \email{bryan@bryanlemon.com}
\alignauthor
Aaron Riesbeck\\
  \email{ariesbeck@mix.wvu.edu}
\alignauthor
Dr. Timothy J. Menzies\\
  \email{tim@menzies.us}
\and
\alignauthor
Justin Price\\
  \email{justin.n.price@gmail.com}
\alignauthor
Joseph D'Alessandro\\
  \email{jdalessa57@gmail.com}
\alignauthor
Rickard Carlsson\\
  \email{ricca742@gmail.com}
\and
\alignauthor
Tomi Prifiti\\
  \email{tprifti@mix.wvu.edu}
\alignauthor
Fayola Peters\\
  \email{fayolapeters@gmail.com}
\alignauthor
Huihua Lu\\
  \email{hlu3@mix.wvu.edu}
\and
\alignauthor
  \affaddr{Lane Department of Comptuer Science and Electrical Engineering }\\
  \affaddr{West Virginia Unveristy}\\
  \affaddr{Morgatown, West Virginia, USA }
\and
\alignauthor
Dr. Daniel Port\\
  \email{dport@hawaii.edu}
  \affaddr{Shidler College of Business}\\
  \affaddr{University of Hawai'i at M\~{a}noa}\\
  \affaddr{Honolulu, Hawai'i, USA }
}
% There's nothing stopping you putting the seventh, eighth, etc.
% author on the opening page (as the 'third row') but we ask,
% for aesthetic reasons that you place these 'additional authors'
% in the \additional authors block, viz.
% Just remember to make sure that the TOTAL number of authors
% is the number that will appear on the first page PLUS the
% number that will appear in the \additionalauthors section.

\maketitle
\begin{abstract}
\input{abstract}
\end{abstract}

% A category with the (minimum) three required fields
\category{H.4}{Information Systems Applications}{Miscellaneous}
%A category including the fourth, optional field follows...
\category{D.2.8}{Software Engineering}{Metrics}[complexity measures, performance measures]

\terms{Delphi theory}

\keywords{ACM proceedings, \LaTeX, text tagging}

\section{Introduction}
\input{joe/intro}
\section{Background}
\subsection{POM - The Predecesor}
\input{tomi/words}
\subsection{The Boehm-Turner Model}
\input{fayola/words}
\section{Simulator Specifications}
\input{joe/words}
\section{POM2 Pseudo Code}
I know this needs to go somewhere better, but...
\input{ariesbeck/words}
\section{Keys: The Search Engine}
\input{jprice/keys}
\section{Results}
\input{bryan/words}
\section{Discussion}
What the results say will go here. Without results, this is empty.
\subsection{POM2 against POM1}
\subsubsection{Why the difference}
\input{jprice/hybrid}
\section{Future Work}
\input{lsheep/words}
\section{Related Work}
\subsection{Brahms}
\section{External Validity}
\subsection{Model Human Behavior}
\subsection{Diversity Across the project} 

\section{Conclusions}
This paragraph will end the body of this sample document.
Remember that you might still have Acknowledgments or
Appendices; brief samples of these
follow.  There is still the Bibliography to deal with; and
we will make a disclaimer about that here: with the exception
of the reference to the \LaTeX\ book, the citations in
this paper are to articles which have nothing to
do with the present subject and are used as
examples only.
%\end{document}  % This is where a 'short' article might terminate

%ACKNOWLEDGMENTS are optional
\section{Acknowledgments}
This section is optional; it is a location for you
to acknowledge grants, funding, editing assistance and
what have you.  In the present case, for example, the
authors would like to thank Gerald Murray of ACM for
his help in codifying this \textit{Author's Guide}
and the \textbf{.cls} and \textbf{.tex} files that it describes.

%
% The following two commands are all you need in the
% initial runs of your .tex file to
% produce the bibliography for the citations in your paper.
\bibliographystyle{abbrv}
\bibliography{%
bryan/refs.bib,%
fayola/refs.bib,%
fig1/refs.bib,%
menzies/refs.bib,%
joe/refs.bib,%
jprice/refs.bib,%
lsheep/refs.bib,%
rickard/refs.bib,%
tomi/refs.bib}  % sigproc.bib is the name of the Bibliography in this case
\end{document}
