% This is "sig-alternate.tex" V1.9 April 2009
% This file should be compiled with V2.4 of "sig-alternate.cls" April 2009
%
% This example file demonstrates the use of the 'sig-alternate.cls'
% V2.4 LaTeX2e document class file. It is for those submitting
% articles to ACM Conference Proceedings WHO DO NOT WISH TO
% STRICTLY ADHERE TO THE SIGS (PUBS-BOARD-ENDORSED) STYLE.
% The 'sig-alternate.cls' file will produce a similar-looking,
% albeit, 'tighter' paper resulting in, invariably, fewer pages.
%
% ----------------------------------------------------------------------------------------------------------------
% This .tex file (and associated .cls V2.4) produces:
%       1) The Permission Statement
%       2) The Conference (location) Info information
%       3) The Copyright Line with ACM data
%       4) NO page numbers
%
% as against the acm_proc_article-sp.cls file which
% DOES NOT produce 1) thru' 3) above.
%
% Using 'sig-alternate.cls' you have control, however, from within
% the source .tex file, over both the CopyrightYear
% (defaulted to 200X) and the ACM Copyright Data
% (defaulted to X-XXXXX-XX-X/XX/XX).
% e.g.
% \CopyrightYear{2007} will cause 2007 to appear in the copyright line.
% \crdata{0-12345-67-8/90/12} will cause 0-12345-67-8/90/12 to appear in the copyright line.
%
% ---------------------------------------------------------------------------------------------------------------
% This .tex source is an example which *does* use
% the .bib file (from which the .bbl file % is produced).
% REMEMBER HOWEVER: After having produced the .bbl file,
% and prior to final submission, you *NEED* to 'insert'
% your .bbl file into your source .tex file so as to provide
% ONE 'self-contained' source file.
%
% ================= IF YOU HAVE QUESTIONS =======================
% Questions regarding the SIGS styles, SIGS policies and
% procedures, Conferences etc. should be sent to
% Adrienne Griscti (griscti@acm.org)
%
% Technical questions _only_ to
% Gerald Murray (murray@hq.acm.org)
% ===============================================================
%
% For tracking purposes - this is V1.9 - April 2009

\documentclass{sig-alternate}
\usepackage{cite,times}
\usepackage[usenames,dvipsnames]{color}
\usepackage{url}
\usepackage{tim/tricks}
\usepackage{raj/tricks}
\usepackage{markus/tricks}

\begin{document}
%
% --- Author Metadata here ---
\conferenceinfo{MSR}{'11 Honolulu,  Hawaii USA}
%\CopyrightYear{2007} % Allows default copyright year (20XX) to be over-ridden - IF NEED BE.
%\crdata{0-12345-67-8/90/01}  % Allows default copyright data (0-89791-88-6/97/05) to be over-ridden - IF NEED BE.
% --- End of Author Metadata ---

\title{``Popularity'' is (almost) a Perfect Predictor for Defects}
%
% You need the command \numberofauthors to handle the 'placement
% and alignment' of the authors beneath the title.
%
% For aesthetic reasons, we recommend 'three authors at a time'
% i.e. three 'name/affiliation blocks' be placed beneath the title.
%
% NOTE: You are NOT restricted in how many 'rows' of
% "name/affiliations" may appear. We just ask that you restrict
% the number of 'columns' to three.
%
% Because of the available 'opening page real-estate'
% we ask you to refrain from putting more than six authors
% (two rows with three columns) beneath the article title.
% More than six makes the first-page appear very cluttered indeed.
%
% Use the \alignauthor commands to handle the names
% and affiliations for an 'aesthetic maximum' of six authors.
% Add names, affiliations, addresses for
% the seventh etc. author(s) as the argument for the
% \additionalauthors command.
% These 'additional authors' will be output/set for you
% without further effort on your part as the last section in
% the body of your article BEFORE References or any Appendices.

\numberofauthors{3} %  in this sample file, there are a *total*
% of EIGHT authors. SIX appear on the 'first-page' (for formatting
% reasons) and the remaining two appear in the \additionalauthors section.
%
\author{
% You can go ahead and credit any number of authors here,
% e.g. one 'row of three' or two rows (consisting of one row of three
% and a second row of one, two or three).
%
% The command \alignauthor (no curly braces needed) should
% precede each author name, affiliation/snail-mail address and
% e-mail address. Additionally, tag each line of
% affiliation/address with \affaddr, and tag the
% e-mail address with \email.
%
% 1st. author
\alignauthor
Markus Lumpe\\
Rajesh Vasa\\
       \affaddr{Faculty of ICT}\\
       \affaddr{Swinburne Uni.}\\
       \affaddr{Hawthorn, Australia}\\
       \email{\{mlumpe,rvasa\}@swin.edu.au}
\alignauthor
Tim Menzies\\
       \affaddr{Com. Sci. \& Elec. Eng.}\\
       \affaddr{West Virginia Uni.}\\
       \affaddr{Morgantown}\\\affaddr{USA}\\
       \email{tim{@}menzies.us}
\alignauthor
Burak Turhan\\
       \affaddr{Dept. Info. Processing Science}\\
       \affaddr{Uni.  of Oulu}\\
       \affaddr{Oulu, Finland}\\
       \email{turhanb{@}computer.org}
}

% There's nothing stopping you putting the seventh, eighth, etc.
% author on the opening page (as the 'third row') but we ask,
% for aesthetic reasons that you place these 'additional authors'
% in the \additional authors block, viz.
\date{26 Jan 2011}
% Just remember to make sure that the TOTAL number of authors
% is the number that will appear on the first page PLUS the
% number that will appear in the \additionalauthors section.

\maketitle

\input{Abstract}

% A category with the (minimum) three required fields
%A category including the fourth, optional field follows...
%\category{D.2.8}{Software Engineering}{Metrics}[complexity measures, performance measures]

\input{Intro}

\input{Popular}

\input{Prediction}

\input{InspectionOptimization}

\input{PopAndIOpt}

\input{Results}

\input{Discussion}

\input{Validity}

\input{Conclusion}

\section*{Acknowledgments}
 
This work was conducted at Swinburne University of Technology, West Virginia
University, and University of Oulu with partial funding from (1)~the New Zealand Foundation for
Research, Science and Technology, (2)~the United States
National Science Foundation, CISE grant 71608561, (3)~a research
subcontract with the Qatar University NPRP 09-1205-2-470, and (4)~TEKES under the 
Cloud-SW project in Finland.

% The following two commands are all you need in the
% initial runs of your .tex file to
% produce the bibliography for the citations in your paper.
\bibliographystyle{abbrv}

\bibliography{popular}  % all refs (for consistency)

%\bibliography{oldrefs,timrefs,rajrefs,markusrefs,burakrefs}  % sigproc.bib is the name of the Bibliography in this case

%\input{Appendix}

% You must have a proper ".bib" file
%  and remember to run:
% latex bibtex latex latex
% to resolve all references
%
% ACM needs 'a single self-contained file'!
%
%APPENDICES are optional
%\balancecolumns
%Appendix A
%\balancecolumns % GM June 2007
% That's all folks!
\end{document}

